LabTech Extruders
| |
Micro
Injection Molding Machines |
|
| |
|
|
|
Request
a quote on this unit.
SPECIFICATION DATA SHEET
|
Model:
High-Force 5
All-Electric Injection
Moulding Machine
|
 |
| |
|
|
Clamping Unit: |
|
|
| |
Clamping System: |
Electrically actuated
single toggle joint |
| |
Maximum Clamping Force: |
50kN |
| |
Tie Bar Spacings: |
Vertical 82 mm
Horizontal 165mm
|
| |
Tie Bar Diameter: |
30mm |
| |
|
|
| |
Platen Dimensions: |
Vertical 180 mm
Horizontal 260 mm
|
| |
Open Daylight: |
145 mm |
| |
Ejector System: |
Adjustable strike pins |
| |
Ejector Force: |
15kN |
| |
Ejector Stroke: |
20 mm
|
|
Electrical Unit: |
|
|
| |
Servo Motor Clamp Drive: |
0.4 KW |
| |
AC Motor Screw Drive: |
0.55 kw |
| |
Electrical Requirements: |
220/240 V,1-phase,
50/60Hz, 5A |
| |
|
100/120V, 1-phase,
50/60Hz,10A
|
| |
|
|
|
Plastification and
Injection Unit: |
Plastification System:
Injection Systems:
Screw Diameter:
Theoretical Injection
Volume:
Maximum Shot weight (g):
Maximum Injection Rate:
Maximum Injection Speed:
Maximum Screw Speed:
Number of Temp. Control
Zones:
Heating Capacity:
Maximum Injection Unit
Stroke:
|
Short Pitch Screw
Integral with Clamping
System
20 mm
5 cm3
3.25 PE/PP, 4.75PS/PA/ABS
32 cm3/sec
100mm/sec
100 r.p.m.
4 (2 barrel, 1 nozzle, 1
flange)
0.97 kW
25mm |
|
Dimensions: |
Length:
Width:
Height: |
1120 mm
550 mm
850 mm
|
|
Weight: |
125 kg |
Construction Specification
| |
|
|
|
Screw Drive: |
|
AC Totally Enclosed
Motor, Connected to a Compact, Precision Helical
Bevel Gearbox |
| |
|
|
|
Screw Speed Control: |
|
AC Flux Vector Inverter
|
|
Screw Position Control: |
|
Linear Position Sensor
Accurate to 0.01 mm
|
|
Plasticizing Screw: |
Profile:
Material:
Screw Tip:
Check Ring |
Short Pitched for
Controlled Mixing / Melting
High Strength Alloy Steel
- Nitrided
Replaceable
Replaceable
|
|
Barrel: |
Bore:
Material:
Heating:
Control Thermocouples:
Feed Block:
|
Precision Honed
High Strength Alloy Steel
- Nitrided
2-Zone Electric via Band
Heaters
Type J
Cored for Cooling |
|
Temperature Control: |
Control:
Switching:
Temperatures: |
3-term PID
Solid State
Set from Push-button
Display
|
|
Tie Bars: |
Material: |
High Tensile Steel
Cylindrically Ground
|
|
Linear Bearings: |
Type:
Lubrication: |
Plain
Integral - Maintenance
Free
|
|
Mould Clamp: |
Type:
Bearings:
Pivot Shafts: |
Toggle
Plain
Hardened Steel
|
|
Clamp Drive: |
Type:
Drive:
Gearbox: |
Precision Ball Screw
High Torque Servo Motor
Helical |
|
Clamp / Injection Speed
Control: |
|
Digital Servo Drive
System
|
|
Clamp / Injection Position
Control: |
|
Linear Position Sensor
Accurate to 0.01 mm
|
|
Injection Nozzle: |
|
Easily Removable |
| |
Various Styles Available,
’Open’ or ’Shut-off’ type: |
Heated
Unheated
Taper Nozzle
Flat Nozzle
Radius Nozzle |
| |
|
|
|
Ejector: |
|
Adjustable Ejector strike
Pin to Suit Spring-loaded In-mould Ejector Systems
|
|
Frame: |
Material:
Finish: |
Welded Heavy Duty Steel
Painted |
| |
|
|
|
Controls: |
|
Touch Screen |
|
|
|
|
|
|
|
|
|
| |
|
|
|
Call
(810) 516-1700 for Pricing |
| Covering
Michigan, Ohio, Ind, Ill, Canada for LabTech Engineering Co. |
|
Milabtech LLC 2009
14042 Iroquois Woods Dr.
Fenton, Michigan 48430 |
| |
aaaaaaaaaaaaiii
|